One stop industrial temperature control solution supplier
30 ℃ TO -273 ℃
2019-12-08
In October 2019, we provided two sets of 2500Nm³/h with flare gas compression treatment for a petrochemical enterprise in Guangdong, and completed commissioning and installation.
Learn More +
For Chengdu Quality Testing Institute to provide a set of cooling system solutions: including low temperature refrigeration unit and auxiliary equipment cooling tower, cooling water pump, freezing water pump, circulating stainless steel water tank first level pipeline installation. Help China quality inspection.
Learn More +
2020-04-25
Stirling Refrigeration Equipment Co., Ltd. is a one-stop supplier of industrial temperature control solutions: for the process production process from room temperature 30℃ to low temperature -273℃ constant temperature and humidity, low temperature temperature control temperature to provide high-quality solutions, high-quality products, high-quality services. The company's products include: industrial cryogenic refrigerating unit, low temperature mixed refrigerant unit, low temperature liquid nitrogen unit, low temperature liquid helium unit, etc.
Learn More +
Cold storage load calculation, cold storage load calculation, cold load calculation, cold storage load calculation table, cold storage design
Learn More +
There are always all kinds of troubles in the process of using industrial water chiller. The following are some common problems for your reference; 1. What is the reason why the difference between high and low pressure is too low? When the outside temperature is very low, the temperature difference between the refrigerant water and the cooling water of the half-sealed screw is small, resulting in the pressure difference between the suction and the exhaust is small, and the problem of the low and high pressure difference will occur. 2, low temperature chiller belongs to static equipment or dynamic equipment? Equipment is divided into dynamic equipment, static equipment, dynamic equipment refers to the driving machine driven by the rotating equipment, such as pumps, compressors, fans, motors and molding machines, packaging machines, mixers and so on; Static equipment mainly refers to furnace, tower, reaction equipment, storage tank, heat transfer equipment, etc. Among them, the more special air cooler, air cooler needs to press the equipment management, air cooling bundle according to static equipment management. The chiller has pump, compressor, fan, motor and other components, so the chiller belongs to the dynamic equipment. 3. Where does the water-cooled screw chiller come out with frozen water and cooling water? The one in the water tower is the condenser, where the circulating water is the cooling water. Evaporator there out of frozen water, generally do insulation, and the evaporator is above the condenser, the evaporator is thicker than the condenser. 4. What are the reasons for the difference between the evaporation temperature of the refrigerator and the cold water outlet temperature of about 10? ①, return temperature is too high (capillary or throttle problem) ②, the heat dissipation effect of the condenser is not good (3) Too little refrigerant in the refrigeration system.
Learn More +National Service Hotline
Address: No. 66, Shuangfu 1st Road, Chenghua District, Chengdu
SAF Coolest v1.2 设置面板 APQSS-ASNW-NSZSE-AVQ
无数据提示
Sorry，There is currently no content in the current column!
You can view other columns or return to Home
