One stop industrial temperature control solution supplier
30 ℃ TO -273 ℃
Frequency converter is a power control equipment which uses frequency conversion technology and microelectronics technology to control AC motor by changing the working power frequency of motor. In the specific application of frequency converter plays an important role, so what are the main roles of the specific frequency converter? This article will give you a specific introduction.
Learn More +
Industrial robots are gradually used in major factories, but many people do not know much about industrial robots. Many people have only heard of industrial robots but have not heard of controllers. This article will give you an introduction to the industrial robot controller, see what it is composed of several parts, and what is the main function of the industrial robot controller.
Learn More +
Industrial controllers are used in many modern systems, such as DCS systems that interface with enterprise systems so that the production process can be embodied in the overall operation of the business. DCS system is often used in oil refining, sewage treatment plants, chemical plants and pharmaceutical factories and other industrial control fields. This paper mainly introduces the basic structure and type of industrial controller system.
Learn More +
Industrial temperature controller refers to the automatic control element that occurs physical deformation inside the switch according to the temperature change of the working environment and produces some special effects, resulting in on-off or off-action. At present, the application of industrial temperature controller is very wide, this paper focuses on the introduction of industrial temperature controller Settings, and how to set the temperature of industrial temperature controller.
Learn More +
There are always all kinds of troubles in the process of using industrial water chiller. The following are some common problems for your reference; 1. What is the reason why the difference between high and low pressure is too low? When the outside temperature is very low, the temperature difference between the refrigerant water and the cooling water of the half-sealed screw is small, resulting in the pressure difference between the suction and the exhaust is small, and the problem of the low and high pressure difference will occur. 2, low temperature chiller belongs to static equipment or dynamic equipment? Equipment is divided into dynamic equipment, static equipment, dynamic equipment refers to the driving machine driven by the rotating equipment, such as pumps, compressors, fans, motors and molding machines, packaging machines, mixers and so on; Static equipment mainly refers to furnace, tower, reaction equipment, storage tank, heat transfer equipment, etc. Among them, the more special air cooler, air cooler needs to press the equipment management, air cooling bundle according to static equipment management. The chiller has pump, compressor, fan, motor and other components, so the chiller belongs to the dynamic equipment. 3. Where does the water-cooled screw chiller come out with frozen water and cooling water? The one in the water tower is the condenser, where the circulating water is the cooling water. Evaporator there out of frozen water, generally do insulation, and the evaporator is above the condenser, the evaporator is thicker than the condenser. 4. What are the reasons for the difference between the evaporation temperature of the refrigerator and the cold water outlet temperature of about 10? ①, return temperature is too high (capillary or throttle problem) ②, the heat dissipation effect of the condenser is not good (3) Too little refrigerant in the refrigeration system.
Learn More +National Service Hotline
Address: No. 66, Shuangfu 1st Road, Chenghua District, Chengdu
SAF Coolest v1.2 设置面板 APQSS-ASNW-NSZSE-AVQ
无数据提示
Sorry，There is currently no content in the current column!
You can view other columns or return to Home
